Mark-o

Hey mate, I REALLY REALLY APPRECIATE YOUR HELP! GOT IT DONE! THANK YOU! ended up installing the LR-8839

Hey mate thaks for your patience and replys... im a newbie to this nissan crap remote dilemma. anyways so I hooked the unit i have purchased off ebay and sat in the car and tried to lock all doors from the main switch on the drivers arm rest i have realised that all doors lock/unlock EXCEPT the drivers door? I googled it quick and apparently its a factory setting? and when i lock/unlock the driver door manually all doors lock/unlock and hazards flashes so i did just that and i inserted the key in and out for 6 times the hazards didnt flash... so i tried multible times slowly and fast and nothing happens, i watched another video on youtube this bloke was a preforming programming on patrols 2003-2009 and the precodure was insert the key in turn ignition on NO cranks for 6 times then wait until the hazards flashed and turn to position 2 and then press and hold unlock button and press lock button 3 times till light flashes .... I did all that and still no luck ;(.

Hey mate so today purchased LR-8839 / 386M off Jaycar and installed it and exactly same thing happened with ebay unit LB-408. Which is there is power to the unit but it doesn't lock/unlock the doors. I thought to myself hmmm maybe i fried the central locking module in the car? So decided to install the unit the came with the car which i found out about an extensive research it was Mongoose MCL2000 with 2 button keys MRC200W, anyways long story short the old unit works BUT it doesn't pick the signal unless the key right next to it or within 10CM radius checked the antenna wire and it seems to be fine nothing odd about it, so i though i would just add another wire where the soldering exposed to see if the wire is short from inside and nothing has changed. Now i have 3 dud units if anyone reads this post and have had same experience please share you solution as im banging my head as im typing this... TIA

mate honestly im puzzled right now! all wirings are exactly matching where they should be and still nothing. I might purchase a jaycar unit LR-8839 and see if that should solve the mystry.

Thanks mate much appreciated!!!! I wired the wiring exactly how you have mentioned in the post BUT still not locking/unlocking. im scratching my head as im out of ideas :(

Hi guys, I purchased a second hand patrol that came with aftermarket Mongoose keyless entry and it wasn’t working properly. I replaced batteries on both remotes and it wouldn’t pick up a signal unless the remote was within 10cm. So I decided to purchase another unit off eBay and connected it to the vehicle. It picks the signal perfectly BUT does not lock/unlock the car? The unit itself clicks when pressing buttons and the flasher lights working fine. Central locking is working fine when locking/ unlocking driver door manual. I have connected the White/black wire on the unit to the Blue/red wire, and the White wire with blue wire on the car. I know the central locking was working fine with the older unit but the signal was horrible. Does anyone have advice on how this could be fixed?