June 13, 201213 yr comment_4794 Cheers mate? I looked on eBay they don't have the tie rod or draglink on there can I ask how much you paid for them? Edited June 13, 201213 yr by The Big Rig Report
June 15, 201213 yr Author comment_4853 Cheers mate? I looked on eBay they don't have the tie rod or draglink on there can I ask how much you paid for them? I think they are around 180 for lowers and 150 for uppers, you are best off re-using your Nissan bushes. Report
June 22, 201213 yr comment_5062 I thought you would be finished this now and moved on to a new one Report
June 25, 201213 yr comment_5138 Did u check the rear sill inside the barn doors? I just took the rubber off mine and found a dogs breakfast of rust under it Report
June 26, 201213 yr Author comment_5161 Did u check the rear sill inside the barn doors? I just took the rubber off mine and found a dogs breakfast of rust under it Few bits here and there. ill fix it. Dropped it off today to be stripped and built this week, i cant do anything much on the build this time as im busy with work. hope Alan takes his time and does a good job for me. My kings are now inside Australia . . . . but haven't arrived yet . . . tomorrow hopefully or the day after . Report
June 26, 201213 yr Author comment_5162 Also any chance you can send that Bike rack part up, You get it yet Dean? Also been a Small development guys. . . . looks like i might be keeping this one for a while. building it for myself from here in. . . Edited June 26, 201213 yr by Jacket_1985 Report
June 26, 201213 yr Author comment_5163 Got kings late today. . . . front diff is braced/laminated, and undergoing build, locker is in. . . read diff yet to start. also Pulled plastic flares off, and removed scrub bars. Start on the electric system soon. Will fit Simex's as soon as i get it back. Edited June 27, 201213 yr by Jacket_1985 Report
July 3, 201213 yr Author comment_5316 Flexin' it up. Kings are incredible. ARB airlockers are good too, love pede's. . . . Report
July 3, 201213 yr Author comment_5323 C'MON!!!! i want 2,000 hits. . . . that will mean every member on this forum has looked at this thread an average of 6 times! OK, a little childish. Report
July 3, 201213 yr comment_5324 Why not. I'd love to be able to do what you do. Once again this is going to an epic build once completed.. Keep it comin. Report
July 4, 201213 yr comment_5356 Still difficult for GU top hinge. but yes -that is the other option. . . . remove guard, As a side point, ill say nearly any wrecker you go to will have no upper RHS GU hinges left. . . . they are somewhat of a crap design. tip: pinch a lower left hand side one(all wreckers seem to have these, and they are about half the price lol.) they are cross interchangeable. bottom right fits top left, top right fits bottom left. Just took a look at mine and the top and bottom hinges appear to be different to each other so I can't see why the bottom left would suit the top right and visa versa? Report
July 4, 201213 yr Author comment_5397 Just took a look at mine and the top and bottom hinges appear to be different to each other so I can't see why the bottom left would suit the top right and visa versa? because they are symmetrically opposed, you cant flip a bottom right and put it on top, but you can use the lower left. . . . -you notice that the hinge bit that bolts to the body is the same. . . but the bits that bolt to the door are staggered. . . . thats to go with the curve of the GU door, thats why it wont work swapping bottom to top on the same side. Report
July 4, 201213 yr comment_5398 OK, a little childish. Yes. Considering that you're about 16km from where I live, where exactly is that area just a few kilometres from your place? Is that the Little Morwell River? Cheers Ray Report
July 4, 201213 yr Author comment_5413 Yes. Considering that you're about 16km from where I live, where exactly is that area just a few kilometres from your place? Is that the Little Morwell River? Cheers Ray its "upper middle creek road" yinnar south. near the hippy house. http://maps.google.c...sp=1&sz=19&z=17 livingston track has some nice tracks off it, morwell river road up the top around the prison farm, and further south are good. that is where this is from. Edited July 4, 201213 yr by Jacket_1985 Report
July 4, 201213 yr comment_5415 Ah, I haven't driven that road, though did have a look around the Bungaree area and Grand Ridge Road and saw some pretty good looking tracks in the logging areas. It's boggy enough where we go collecting wood at the moment, so don't need any more excitement. Cheers Ray Report
July 5, 201213 yr Author comment_5425 Ah, I haven't driven that road, though did have a look around the Bungaree area and Grand Ridge Road and saw some pretty good looking tracks in the logging areas. It's boggy enough where we go collecting wood at the moment, so don't need any more excitement. Cheers Ray When i organize a daytrip here we should meetup. Im planning a tour of Boolara, budgeree, and middle creek, so pretty close. Report
July 5, 201213 yr comment_5432 I went to the Halston area a few weeks ago to have another look at the side tracks for wood and the main road going into the lower area required 4L just to get back without mad wheel spin (that was on my road tyres). The mud around here can get somewhat insane after even just a bit of rain. I might wait till summer and check out the logging tracks around Grand Ridge, I'm just not set up for the mud in this area. Cheers Ray Report
July 9, 201213 yr Author comment_5588 Where did you get them from? Alan @ Racebred4wd. Alexanders road morwell, Vic. PHONE: 0351 341 007 I get heaps of bits from Alan, he does good work, i paid $630 fitted for this set of sliders. probably not a normal price, but it gives you an idea. EDIT: asked Alan today, Normal fitted price is 700. just the sliders are 550 plus postage. Edited July 10, 201213 yr by Jacket_1985 Report
Create an account or sign in to comment