KMsMK

Any of the auto stores should be able to get a replacement sender in.

Great info mk there are goog pics around the net too Sent from my iPhone using Tapatalk

Would putting a breather hose, like a diff breather, up high in the engine bay work? Sent from my iPhone using Tapatalk

Nice mk Russ did you make the winch bar, looks a lot better than the old ally one Sent from my iPhone using Tapatalk

For sure landy Sent from my iPhone using Tapatalk

Here's one tweaked Sent from my iPhone using Tapatalk

They also come with a couple of yrs warranty. I wonder what it covers? Sent from my iPhone using Tapatalk

You'd be a handy mate to have around. Want to move up here, I could use your abilities. Sent from my iPhone using Tapatalk

I like it a lot. What are the Aldi winches like? Do the 'winch' (stand) the test of time? I'm thinking of getting one when they come back out. Sent from my iPhone using Tapatalk

I finally got to drive the truck on the road again, just drove it about 10 km and now it's back at home. Now I can get to it on week nights. Jayden, 3yr old son, hates it when I go play on my truck after work. Sent from my iPhone using Tapatalk

You could be right the mk tank especially on the aerial end. I tried to google info on that end but couldn't find anything so just did what I thought was correct by looking at the copper and wires go. I'm 90% sure I did it right though. I have also decided to take it and get it hooked up correctly. Don't want to get out on the tracks and have it stop working on me.

Got a new 4wd action mag today called OFF-ROAD Addiction issue 2 and right near the front of the mag is an mq patrol, with external roll cage and 40in tyres. looks tops. it also says that there will be a full feature in an upcoming mag.

In tapatalk, there is one in the top right corner of the window. Sent from my iPhone using Tapatalk

Got any pictures? Sent from my iPhone using Tapatalk

Forgot to get a photo, but they are both about 7-8mm diameter. The long one is 1550mm long and the short one is 650mm. Will try to get photos next wkend. Sent from my iPhone using Tapatalk

Thought I'd start another thread for what everyone is doing with their trucks. This weekend I've been fixing my rear bumper needed extra bracing cause of spare tyre carrier, so I'm using angle to beef it up. I also finished paint the lower section of the truck. It's now a white with a black bottom. It's good to have her looking good again. Then I got the horn and blinkers working. Not long now... Sorry about the photos, I only remember to take them when the light is nearly gone. Sent from my iPhone using Tapatalk

Thanks for that, I'm pretty good when it comes to X-rays but any others is out of my league Sent from my iPhone using Tapatalk

g'day Jacket welcome aboard

great pics, well done

G'day everyone, I'm in Hervey Bay. The truck isn't on the road atm but hopefully by June...this year.

I even managed to get it in my eye, stings really bad.

thanks Mktank, where does one get it checked? auto electrician (doubt) or a dedicated stereo shop? Do the tech's need access to the back of the uhf cause mine is in a front roof console which can be a real b*#ch to take down? By the way I heard another snipit on the uhf today, 2 sec worth.

I'm after a passenger seat lever cover (the one on the door side of the seat that moves the it forward). And also the cord that does the same job. PM if you can help, please.

Thanks mike, I will check. Although it should be ok.

I resoldered the connector that goes into the UHF (oricom 80ch, the one on sale at autobarn) the truck came with a couple of aerials, a long thin black one and a shorter black one. You can see the base on the bullbar. I will get photos of the 2 aerials cause I have no idea what dB either are. I heard about 2 sec of talk today but later when I asked if anyone was on channel I didn't get an answer.