General Patrol Discussion
General Patrol discussions, technical topics that span multiple models, and off-road performance and equipment topics that do not have a category below. Please post model specific topics in their relative sections.
80 topics in this forum
-
-
First of all Yo Yo, I'm new My flagship : Patrol Y61 2003 ZD30 270000km And now, problem... not first not last... I’ve changed oil 3000 km ago with 1mm more than max and up to this day it was same - zero oil lost. Last week, First day of trip we did hard and long downhill, I used reductor and mostly on 1st gear without brake. when we finished, under the mountain my Y61 on idle shown bright grey smoke from exhaust - something super new - there was no smoke so far, almost zero, and never on idle. But on higher rpms it was ok, so I continued travel, with few more incidents on idle but not very long. Next day morning i checked oil and fro…
-
- 0 replies
- 978 views
-
-
Hi, Can anyone identify this chip? Looks similar to a DTE when searching and seems to have the same casing but the DTE chips have buttons, and look slightly different. Searching the numbers on the tag return nothing Also Is it possible to buy a replacement Wiring loom from Injector Pump to the factory loom (with or without the Tee off for the chip)? cheers, Shane
- 5 replies
- 4k views
-
HI MEMBERS , FULLY REBUILT ZD30 NAVARA 2004 , NEW INJECTOR PUMP AND INJECTORS BRAND NEW HEAD , GOT IT UP AND RUNNING but NO FULL POWER IN 4TH AND 5TH , STUGGLES TO GET UP TO 95 CLICKS WHAT HAVE I DONE WRONG HAD THE MAP CHECKED NO FAULTS NEW TURBO, , NO ENGINE LIGHT , COULD HAVE THE VACUAM LINES ON WRONG WITH THE VNT , NEED HELP GUYS , SHOULD GO LIKE THE CRAPPERS WITH A NEW MOTOR , SHOULD I LOOK AT TIMING ,(SURE ITS RIGHT ), SOUNDS LIKE IT IS NOT ADVANCING IN THE PUMP ? NEED URGENT HELP JUYS , CHEERS WELSHY01
-
- 0 replies
- 3.1k views
-
-
Have nothing to post in here but. I am the first Qld based guy to post i this section. Anyway if I can help anyone locally let me know. I am on the gold coast.
- 38 replies
- 11.6k views
-
Welcome to the CRD club. I feel wrong taking number one position but don't think I can take 74 as its not up to there yet but one day soon it will be :-D #1 The Big Rig #2 99disco #3 heyhey
- 7 replies
- 4.5k views
-
I have a front end wobble when between 85 - 95, and when breaking above 85. Also some times when I get above 80km's I get a grinding / bearing rolling noise in front left or front right. This doesn't stop until I get below 10km's. doesn't always happen. Had bearings checked and greased. Can anyone shed some light.
-
- 3 replies
- 4k views
-
-
Good morning to all smart Nissan drivers. I have a 2005 Nissan patrol, 3l turbo diesel wagon. After about 40-45 minutes of driving it looses power with a lot of black smoke coming out of the exhaust. Then if I turn the engine off and let it sit for a few minutes it goes again only for the process to repeat itself. Funny enough that it doesn't seem to affect the revs on the engine when it does this. Any ideas please. Thank you
-
- 3 replies
- 3k views
-
-
Hi all Just wondering if anyone can help me out?. I just got a roadworthy list and was wondering if anyone could suggest places either online or in Vic/Melbourne area. Front Sway Bar Tyres Tail light Front trailing arm bushes Rear upper control arm bushes Mud flaps Fuel filter Front steering stabilizer damper bushes Side step LPG convertor
-
- 0 replies
- 2.8k views
-
-
G'day...what exhaust gas temperature can I expect from my new gauge. So far, less than 200c at idle, and 450c working up bigger hills. Running at 240c to 350c generally? Is that OK for a 3 inch exhaust system. By the way, a good modification for a 3 ltr Patrol, as you all know! thanks. B. i
-
- 3 replies
- 3.2k views
-
-
No Power to the Cranksensor,,?? Any sugestions??
- 1 reply
- 5k views
-
Need to put lift Pump in the 2003 ddi any recomendations?? Cheers boggy bay
- 1 reply
- 3.2k views
-
G'day everyone! My dad has 3L 2000 patrol and were really stumped as to what's going on with it, it starts fine and runs good for 15-20 minutes and then starts conking out, he can have his foot flat on the accelerator and it will go but it jerks around and won't go over 20km,pretty much just dies if he takes his foot off but will chug along if he just keeps putting his foot down,he can pull over for 5 minutes and then it will run good again for 10-15 minutes and do the same,we've taken it to 3 mechanics and no one knows what it is,no codes show up and no engine lights come up,we've changed the fuel filter but it sort of seems like no fuel is getting through or something,c…
-
- 2 replies
- 3.4k views
-
-
Looking a buying a 2012 3lt Patrol in an automatic but have never owned an automatic 4wd before.. Could you please share your pros and cons it would be much appreciated
-
- 1 reply
- 3.2k views
-
-
Nissan—N16 Pulsar, D22 Navara, Y61 Patrol, X-Trail Airbag Inflator Expect recall letters from Nissan....... Cheers
-
- 6 replies
- 4.8k views
-
-
Looking for a good mechanic in lower hunter valley / newcastle to repair and modify my 07 gu 3.0l crd? I have a list of things to do just looking for the workshop side of things. Let me know!
-
- 0 replies
- 3.3k views
-
-
G'day all was just wondering if anyone could help explain why my 02 3LTD had a shudder when starting and even though was running fine now I have loos of power, 3rd gear flat to the floor and it's a slug. My egt gauge is sitting pretty high aswell when just accelerating through the gears up around 4 I back before it gets to 5. I'm gonna clean the maf sensor today and probably replace it if there's no change, any help or advice would be great cheers, newbie westy
- 6 replies
- 5.3k views
-
I have threatened before to mow the inconsiderate fkers down if they got in my way and I finally did. Not quite as I thought though. I was going to a job in the inner city last Thursday. Going through the peak hour Crawl In Marrickville, I just started moving off when this lycra tosser ( yes, he really was wearing Fluro Green and black Lycra) came up the side of me and straight in front. I was in the nearside lane and the traffic in the centre lane was stationary with a bus in front of me in the other lane. I think the deceased to be couldn't get a gap between the lanes big enough with the bus so just chopped in front of me almost at a 90o angle. By the time I sa…
- 8 replies
- 5k views
-
Hi, We are going to the cape in Aug and leaving from Brisbane for 4 weeks. Does anyone have any must see or do things while we are up there. We are looking at the doing the old TT (goes without saying) creb track, bloomfield track, frenchmans line, loyalty beach, day trip to T island etc, Also thinking of crossing the jardine and not using the ferry. Any thoughts would be much appreciated. Rob
- 9 replies
- 4.9k views
-
The Veg oil Primer. No way to keep this short so make a cuppa and settle in or go to the next thread if your concentration is short. I have tried to address commonly asked questions in this post to make the info as informative as possible and answer as many questions as possible instead of just creating more. Vegetable oil based fuels are a replacement for Diesel Fuel only. They CANNOT be used in petrol engines. There are basically 3 ways of using Veg oil: * Straight Veg oil Known as WVO ( Waste Veg oil) and SVO (Straight Veg oil.) Any vegetable oil can be used. Cottonseed, canola, Corn and sunflower are the most popular in oz. Peanut, olive , palm and other …
- 62 replies
- 30.7k views
-
Hey guys I have a 1995 GQ with a 4.2lt diesel motor as of late while driving at around about 3000rpm it starts a kind of surging wont go any faster then about 95km per hour and that's pushing it. Its fine driving around town but as soon as I need to go out of town it starts a kind of surging and blowing white smoke. I put a new fuel filter, air filter and ran some diesel injector cleaner through it which did not change a thing I have taken it to my mechanic where it ran fine for them. the only problem they found with it was a hose clamp was missing on the injector pump which they replaced they then test drove it and it still rand fine for them. I got it back yesterday an…
-
- 3 replies
- 3.7k views
-
-
Lying in bed last night I got a brainwave. It happens every 10-20 years. I built a an oil burner a while back that works on draught alone. Burns pretty clean and puts out awesome heat though most of it of course is in the flue gasses rather than radiant. The thing is an old casserole type pot I cut a large hole in the top and sat an old fire extinguisher on that I cut the top and bottom out of and put a load of holes in the sides. On top of that I put a length of 4" Pipe. Around the edges of the lid of the pot I put 4 1" holes. The fire burns in the pot and gets the primary air through the 1" holes then goes into the secondary chamber where the air mixes…
- 58 replies
- 16.5k views
-
My son Finished school this week and had his formal on Monday and graduation today. On monday night there were about 50 Kids and proud parents all converged on a teachers house where they caught a Vintage Bus to go into the function in the city. Out of all the parents there, I saw on little P&S camera. Everyone else was snapping away madly on their phones. Today it was about 1500 parents and while I saw maybe 20-30 real cameras and only a few SLR's, again there were HUNDREDS of people squinting into their phones ( and a few Iplads) Snapping away at what really were a fine Bunch of kids. After I gained world famous status at The school this week after my s…
- 8 replies
- 7.3k views
-
I'd like to upgrade the Alternator on the TD 42. There are so many higher amp and far cheaper thing is I could use but the problem is the vac Pump. Wondering if anyone knows of any electrical or mechanical ( belt) driven pumps I could use to replace the one on the alt that wouldn't cost as much as a new alt with pump to start with? Other than that, anyone know of any relative straightforward ways of adding a 2nd alt? I thought I read of something one time but don't remember how it went.
-
- 0 replies
- 3.2k views
-
-
I just recieved my delivery of the Glind Shower system for my 4.2TDi. I dont suppose any members have pictures of which pipes I should connect the thing to? I will post up the install pictures when I start work on it. Also - If any member is after a Glind Shower system I have secured a deal for $475.00 delivered Australia Wide - Let me know if your interested. Here are some photos of what I recieved..
- 37 replies
- 18.7k views