BigGQWesty

Have a look at your nuts, possible not the right leading edge angle, and if there different the will flog out no matter how tight you do them.. As for different offset you may have different width wheels. Some 16x7 and others 16x8 or 10 or so on.. Kallen Westbrook Owner of Westy's Accessories

Well were mo-ing.. Lol The team Silver Rollers is up to 8 with over $250 in the kitty. Please dig deep guys for a good cause. Kallen Westbrook Owner of Westy's Accessories

Have ordered. Kallen Westbrook Owner of Westy's Accessories

I have to opportunity to supply these sweet looking valve caps.. With the keychain spanner Excuse the rim, its about to be repainted There 100% stainless steel, with an internal rubber seal. I'll be doing a forum special for $10+ postage (then you can decide how quick you want them..) Yea, if your interested pm me. Cheers Kallen Westbrook Owner of Westy's Accessories

IT'S A GIRL! The Westbrooks would like to announce the arrival of our newest little princess 'Matilda Anne' in the early hours of this morning. 3.89kg (8lb 9oz) 50cm long. She is just perfect... Mum is doing extremely well aswell. Big sis Sophia is sus that something is up.. Kallen Westbrook Owner of Westy's Accessories

Yea I'm over it.. Don't really visit anymore. Just here and Nissanpatrol Kallen Westbrook Owner of Westy's Accessories

Fark that.. It's dry July though ain't it.. But I wouldn't last a week.. Lol No need to be ashamed of fluf.. It's about the cause.. If your not keen you can always donate to see me with a caterpillar.. Kallen Westbrook Owner of Westy's Accessories

I've joined Movember and Sons for the 30 days of Movember. As a wise man once said, "If you want to make a change, if you want to promote conversation, then grow, or support the growth, of a moustache". Please check out my Movember campaign at http://mobro.co/3417753 and see how I’m helping to change the face of men’s health. Kallen Westbrook Owner of Westy's Accessories

Doh... Kallen Westbrook Owner of Westy's Accessories

And I just sent you a message, did it come threw? Kallen Westbrook Owner of Westy's Accessories

All good here. A little critter we found last week. Also the conversation button is on the bottom tab in the forum home page.. Kallen Westbrook Owner of Westy's Accessories

If its had to get to, pull the rear floor up to expose the hatch which accesses your main tank pickup. On your tank there are 2 line, feed and return, disconnect the smaller of the to and kick the girl over. Get some one to watch for fuel returning. There should be a steady flow at idle. Kallen Westbrook Owner of Westy's Accessories

Not sure about your pics, I use the tapatalk system to up load, this way you can choose the picture size.. As for pm's the tapatalk system doesn't work. You need to start a 'conversation' with the person. Kallen Westbrook Owner of Westy's Accessories

As above, cooling is the key. I know the vt supercharged version had a battery shroud / cooling duct, maybe worth a look. But if you can sheild the battery from the heat it'll last a lot longer Kallen Westbrook Owner of Westy's Accessories

Sounds tops.. So any trips planned yet? Be interesting to see fuel figures once flogging it.. Kallen Westbrook Owner of Westy's Accessories

I needed all of my 6'2" of height that's for sure Cheers from Westy Westy's Accessories.

Well I went for a beach run with the misses and child and come across some mounds. I thought F it.. Let's flex.. This is a stock OME 2" lift kit with a 1" body lift and rear stabilizer factory disconnected.. It had a good inch left in the rear tube and wasn't on the bump stop yet.. Cheers from Westy Westy's Accessories.

Nice work. Welcome to the forum and keep us informed with those 37's Cheers from Westy Westy's Accessories.

Weird.. I don't think they would have tried a 6' bar.. If they did they must be a little limp. Grab a good punch and place it inside the plug notch.. Give it a good crack with a hammer, then try undoing it.. Heating the plug would make the problem worse, you want to contract the plug, not expand it. Crab a can of crc freeze and try it. It'll come out, it depends on how hard you wanna try... Sent from a device which doesn't always agree with my thumbs...

My 91 4.2 gets 12L/100 .. Surly the new ones are better Sent from a device which doesn't always agree with my thumbs...

So what the hell has everyone been doing?? I've added my 1" body lift, and have now lost low range due to it hitting the body. So now I have to remove the gear box spacers and add some engine mount spacers to lift it all back up to suit. Also made my rear work light., And priced up my side step / sliders.. Sent from a device which doesn't always agree with my thumbs...

Doh... Yea good one Sent from a device which doesn't always agree with my thumbs...

And it's now happening again. Won't let me send a new message to admin via tapatalk.. Bummer Sent from a device which doesn't always agree with my thumbs...

Like a slim line UHF. It's quite strong so may be possible to mount a tablet cradle to it.. Sent from a device which doesn't always agree with my thumbs...

Hell yea.. That looks insane. But you have lost me in the design. Could you draw up a diagram for it? Sent from a device which doesn't always agree with my thumbs...